Sustainability Report 2021

Plant, process & transport safety

TAG overview

Avoiding harm to human health and the environment has top priority for us. We have management systems in place to help ensure the safety of our plants and processes and to protect our employees and the environment. In addition, we do everything in our power to ensure that our chemical and pharmaceutical compounds are transported and stored properly.

Our approach to plant, process and transport safety

We seek to minimize manufacturing process hazards wherever possible in order to avoid workplace accidents, production outages and chemical spills, which is why we regularly review our approach to plant and process safety and continuously gauge it using our EHS performance indicators.

Moreover, all our shipments are to reach our customers and sites safely, undamaged and with the required safety information. Several of the materials we store and transport are classified as hazardous. The storage of such dangerous goods and the transport thereof – whether by road, rail, air, or water – are governed by global regulations. To minimize risks to people and the environment, we apply strict safety requirements across the Group that also comply with applicable laws. We conduct regular reviews to ensure our own warehouses as well as those of third parties comply with these regulations.

We train our employees regularly in an effort to prevent human error and also to detect technical defects before they can cause harm.

Roles and responsibilities

Overriding responsibility for plant, process and transport safety lies with Corporate Sustainability, Quality and Trade Compliance (SQ), which coordinates plant and process safety for the company and defines Group-wide EHS standards and regulations. In addition, our individual sites are subject to national and international regulations governing environmental stewardship and public safety. At the local level, the respective site directors are responsible for ensuring compliance with all safety requirements.

We have appointed an EHS manager for each of our sites as well as a dangerous goods manager for every site with logistics activities. The role of the dangerous good manager corresponds to the EU regulations pertaining to the “Dangerous Goods Safety Advisor”. Both individuals advise the site manager on plant, process and transport safety and regularly monitor compliance with safety requirements.

Our commitment: Internal standards and international rules

To ensure safe operation throughout the lifetime of a plant, our Group-wide EHS standards contain specific rules for production plants and processes. These include specifications that determine how special risk analyses and hazard assessments are to be carried out. We have also defined measures for the event of accidental release of chemical substances and for fire protection.

Our Group-wide EHS standards stipulate the safety levels for the storage of hazardous materials at our sites. Along with supplementary standard operating procedures and best practice documents, these EHS standards describe the technology, equipment and organizational infrastructure needed to achieve the appropriate safety levels. Contract warehouses must also adhere to our strict safety requirements. Before we sign a contract with an operator, they must submit a statement detailing how they meet our prerequisites. Our Group-wide EHS standards also define the technical and organizational requirements for such warehouses.

Our Group Transport Safety Standard is based on the United Nations Recommendations on the Transport of Dangerous Goods. This guideline is especially important for sites in countries with insufficient local regulations covering the conveyance of hazardous materials.

Assessing potential risks

Before commissioning a plant, we draft a safety concept and that is subject to continuous review throughout the entire lifetime of the facility and, when necessary, updated until the facility is decommissioned. This safety concept contains an overview of potential risks and specifies corresponding protective measures. After any alterations are made to a plant, we also reassess the hazard and risk situation.

Our Risk Management Process guides all our sites in identifying and assessing risks and is used to devise further measures to minimize them.

We use internal EHS audits to complement the inspections conducted by our EHS and dangerous goods managers in order to ensure that our sites comply with process, plant, transport and storage safety regulations. Normally, these audits are conducted every three years at productions sites and every four years at warehouse and distribution sites. If major shortcomings are identified, we re-audit the respective site the following year. Conversely, we may decide to extend the period between audits at facilities where, based on the findings from previous audits, we deem the potential risk to be low. Our sites are required to rectify any deficiencies discovered during the audit, with the auditor subsequently checking whether the specified corrective actions have been taken.

In 2021, we conducted 51 EHS audits in accordance with our Group-wide EHS standards. Our own warehouse locations accounted for 19 of these audits and interfaces to third-party warehouses for a further 7. Due to the Covid 19 situation, all audits were conducted remotely. 

We report transportation incidents and accidents in accordance with the Recommendations on the Transport of Dangerous Goods – Model Regulations (UN Orange Book, 9.9) in conjunction with the criteria of the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR, 1.8.5.). There were two reportable events in the reporting period. In both cases, the reporting obligation did not lie with our company.

Keeping a close eye on safety

We track EHS performance indicators at all production and warehouse facilities, as well as at major research sites, including both accidents and near misses. We investigate each individual incident and then devise appropriate countermeasures in an effort to reduce the likelihood of such events reoccurring in the future. EHS performance indicator data are reported once a month within each business sector, with the Executive Board receiving reports on the topic once a year. Four indicators are particularly important to us here:

  • Under our EHS Incident Rate (EHS IR), we track and evaluate all major and minor accidents and incidents as well as further EHS-relevant incidents. The EHS IR covers both our own employees as well as those of contractors. To calculate it, we put the number of incidents and the severity of the event in proportion to the number of hours worked. The lower the EHS Incident Rate, the safer the site is. Our EHR IR of 3.9 in 2021 was slightly lower than the year-earlier figure of 3.4.
  • The EHS IR also includes our Loss of Primary Containment (LoPC) indicator. In 2021, we recorded no significant incident-related spills at any of our production, research or warehouse sites Group-wide.
  • A further important indicator is the EHS Leading Rate (EHS LR), which reflects the number and the results of the analyses of near misses and critical situations. Some of our individual business sectors have also defined their own annual targets for EHS IR and EHS LR.
  • In 2021, we set ourselves a new goal for the Lost Time Injury Rate (LTIR) (number of accidents Group-wide resulting in at least one missed day of work per million hours worked). We aim to bring our LTIR below 1.0 Group-wide by 2025. In 2021, our LTIR was 1.2 (2020: 1.3).

Employee training and best-practice sharing

In line with their specific tasks and responsibilities, our employees undergo regular training that is conducted by either their respective supervisor or our EHS managers. They present EHS standards applicable Group-wide, site-specific standards and processes, address changes to international requirements and explain the proper procedures for dealing with incidents. In addition, all newly hired EHS managers complete introductory courses on plant and process safety during their EHStart-up! onboarding.

In the interest of improving safety, we consider it extremely important to continuously share best practices and lessons learned. We want all our production sites to be able to learn from incidents at other facilities and implement preventive measures. Once a month, for instance, site directors and EHS managers participate in safety leadership calls to share new lessons learned. Additionally, the EHS managers of the individual sites regularly hold sessions to discuss matters.

EHS
Short for “Environment, Health and Safety”, this refers to environmental management, health protection and occupational safety throughout a company.
LTIR
The lost time injury rate measures the number of accidents resulting in missed days of work (one or more days) per one million working hours.
SQ
The abbreviation for our Corporate Sustainability, Quality and Trade Compliance function.

Share this page: